Optional Accessories; Maintenance; Explanation Of Symbols - F.F. Group CDD 12V PLUS Original Instructions Manual

8 | English
Chuck does 1. Lock screw
not close or loose.
grip. 2. Swarf in
chuck.

OPTIONAL ACCESSORIES

Art No Model
41 310 BLi 12V/2A
41 311 CH 12V/2A

MAINTENANCE

Regular inspection and cleaning reduces the neces-
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.
HANDLING & STORAGE
Although this machine is small in size, care must still
be taken when handling and lifting. Dropping this
machine will have an eff ect on the accuracy and may
also result in personal injury. This machine is not a
toy and must be respected.
The environment will have a negative result on its
operation if you are not careful. If the air is damp,
components will rust. If the machine is unprotect-
ed from dust and debris; components will become
clogged: And if not cleaned and maintained correctly
or regularly the machine will not perform at its best.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging
should be sorted for environment - friendly
recycling. The plastic components are labeled
for categorized recycling.

EXPLANATION OF SYMBOLS

Double insulation
For indoor use only. Do not expose to
rain.
Wear eye protection.
Damage to lungs if an eff ective dust
mask is not worn.
1. Open chuck
fully and
tighten screw
(left hand
thread).
2. Clean inside
chuck with
cleaning fl uid.
Description
Battery
Charger
GUARANTEE
DECLARATION OF CONFORMITY
 We declare under our sole responsibility that this
 Technical fi le at:
Wear protective gloves
Damage to hearing if eff ective hearing
protection is not worn.
To reduce the risk of injury, the user
must read and understand this manual
before using this product.
Important!
Conforms to relevant safety standards
Li-ion battery must be recycled or
disposed of properly
This product is warranted in accordance with the le-
gal/country specifi c regulations, eff ective from the
date of purchase by the fi rst user. Damage attribut-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.
product is in conformity with the following standards
or standardized documents: EN 62321, EN 55014-1,
EN 55014-2, EN 60745-1, EN 60745-2-1, EN 60745-2-
2 in accordance with the provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC.
FF GROUP TOOL INDUSTRIES S.A., FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos-Greece 19300, Aspropyrgos-Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300 FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos-Greece. 5/03/2018