Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 8536
Summary of Contents for Ronix 8536
- Page 1 CORDLESS SCREWDRIVER 8536...
-
Page 3: Specifications
SPECIFICATIONS Voltage 3.6V Battery Capacity 1.5Ah No Load speed 200RPM Max. Torque 3N.M Charger voltage-frequency 220v-50Hz Net weight Bits, Sockets: 117pcs Accessories Charger: 1pcs PARTS LIST Battery Folding Torque setting indicator Left/right holder On/Off lamp switch USER MANUAL... -
Page 4: Safety Instructions
WARNING: For your personal safety, read and understand before using. SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool”... -
Page 5: Personal Safety
or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating the power tool in damp locations is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. - Page 6 collection can reduce dust-related hazards. POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Page 7 any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Page 8 When installing a bit, insert the shank of the bit well within the collet. If the bit is not inserted deep enough, the grip of the collet over the bit is reduced and the loss of control is increased. Do not run the tool while carrying it at your side. A spinning bit could become entangled with clothing and injury may result.
-
Page 9: Battery Care
Charge battery pack in temperatures above +32 degrees F (0 degrees C) and below +113 degrees F (45 degrees C). Store tool and battery pack in locations where temperatures will not exceed 120 degrees F (49 degrees C). This is important to prevent serious damage to the battery cells. -
Page 10: Operation
BATTERY REMOVAL INSTRUCTIONS Run motor until battery is completely discharged before attempting to remove battery from your tool. 1) Remove the housing screws with a flat blade screwdriver. 2) Remove housing cover by lifting upward from front end of tool. 3) Disconnect lead wires from switch. -
Page 11: Starting Operation
STARTING OPERATION SWITCHING ON AND OFF - To operate on the Driver press the On/Off trigger switch - To turn off the Driver, release the On/Off trigger switch INSERTING DRIVER BITS IMPORTANT: Always unplug the charger and make sure the forward/reverse switch is on the lock position, Refer to the forward/reverse in the coming instruc- tions. -
Page 12: Led Light
driving screws and enable your tool to operate efficiently. OPERATION OF THE DRIVER Only use driver/drill bits which can be securely fastened in the 1/4 “ magnetic bit holder. Before using the screwdriver check whether the screw-bit is inserted correctly. Avoid over tightening screws, otherwise the screw head may become damaged or stripping of the threads may occur. -
Page 13: Environmental Protection
ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. USER MANUAL...
Need help?
Do you have a question about the 8536 and is the answer not in the manual?
Questions and answers