Monitor - Welch Allyn 88002 Operating Instruction

Video colposcope
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Monitor

NOTE: The following is a brief overview of the nomenclature of the Sony PVM-14N1U Video Monitor. For
detailed instructions, please refer to the operation manual that is provided by the manufacturer.
Front Panel of Monitor
26
PLEASE REFERENCE YOUR SONY MONITOR MANUAL FOR FURTHER INFORMATION.
Name
25. Power Switch
and Indicator
26. Line A/Line B
(input select)
Buttons
27. Menu/Exit
28. Down Arrow
29. Up Arrow
30. Enter
31. Power supply
32. Line A/Line B Video In
33. Line A/Line B Y/C In
NOTE: This monitor is shipped with default picture settings. Any change of the on-screen controls may result in
poor picture quality.
25
27
29
28
30
Function
Press to turn the monitor on. The indicator lights in green. To turn the
power off, press again.
Press Line A if the signal is fed through a Line A connector on the back of
the monitor. Press Line B if the signal is fed through a Line B connector on
the back of the monitor.
Press to make the on-screen menu appear. Press again to leave the on-
screen menu. The following parameters can be modified using the on-
screen menu system:
Volume - No function.
Contrast - Adjust the contrast of the screen using the arrow buttons.
Brightness - Adjust the brightness of the screen using the arrow buttons.
Chroma - Adjust the color intensity of the video signal using the
arrow buttons.
Phase - Adjust the phase of the video signals using the arrow buttons.
Color Select - Select the color system of the current input signals.
Language - Select the menu language.
User memory - Select options for storing and recalling menu settings.
In item selection menus, moves the cursor downward. In adjustment and
setting menus, decreases the value of the selected item or moves
downward through item selections.
In item selection menus, moves the cursor upward. In adjustment and
setting menus, increases the value of the selected item or moves
upward through item selections.
Chooses the selected item. Is active only during the first level of
on-screen selections.
Couples with power cord, which should be plugged into a 110-120 VAC
hospital grade cord receptacle outlet (220-240 volt, 50 cycles
for international).
Input connectors for composite video.
Input connectors for high resolution S-Video
10
Back Panel of Monitor
33
32
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

8800488006890028900489006

Table of Contents