Panduit Atlona AT-HDR-M2C Update Instructions

Hide thumbs Also See for Atlona AT-HDR-M2C:

Download this manual

Update Instructions

Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends using

the web GUI for updating the firmware. However, If a network connection is not available, the AT-HDR-M2C firmware

can be updated using a USB-A to USB mini-B cable.

Using the Web GUI

Requirements

•

AT-HDR-M2C

•

Firmware file (.bin file)

•

Computer

1. Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-HDR-

M2C is connected.

2. Go to the System page in the web GUI.

Choose File button

3. Click the Choose File button, under the Firmware Update section.

4. Browse to the location of the firmware file, select it, and click the Open button.

5. Click the Update button.

6. The following dialog will be displayed.

Atlona Technical Support: +1 877.536.3976 option 1

AT-HDR-M2C

Page 1 AT-HDR-M2C Update Instructions Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends using the web GUI for updating the firmware. However, If a network connection is not available, the AT-HDR-M2C firmware can be updated using a USB-A to USB mini-B cable. Using the Web GUI Requirements •...
Page 2 Update Instructions 7. Click the OK button to begin the firmware update process. Click the Cancel button to cancel the process. 8. The update process will take approximately 60 seconds and will automatically reboot the AT-HDR-M2C. 9. After the firmware update process is complete, the Login screen will be displayed. Using USB Requirements •...
Page 3 Update Instructions 4. Delete all files from the USB UPDATE drive, if any are present. 5. Drag-and-drop the firmware file to the drive. 6. After the file has been copied, disconnect the USB cable from both the computer and the AT-HDR-M2C. 7.