Terms & Definitions - RGBlink Q2 Series User Manual

Hide thumbs Also See for Q2 Series:
Table of Contents

Advertisement

Quad SD/HD/3G SDI output
Connector
Appearance
Numbers of Input
Connector Type
Supported Standard
Input Resolution
Analog audio input/output
Connector
Appearance
Numbers of Input
Connector Type
PVW
Connector
Appearance
Numbers of Input
Connector Type
6.2 Terms & Definitions
●RCA: Connector used primarily in consumer AV equipment for both audio and video. The RCA connector
was developed by the Radio Corporation of America.
●BNC: Stands for Bayonet Neill-Concelman. A cable connector used extensively in television (named for its inventors). A
cylindrical bayonet connector that operates with a twist-locking motion .
●CVBS: CVBS or Composite video, is an analog video signal without audio. Most commonly CVBS is used for
transmission of standard definition signals. In consumer applications the connector is typically RCA type, while in
professional applications the connector is BNC type.
●YPbPr: Used to describe the colour space for progressive-scan. Otherwise known as component video.
●VGA: Video Graphics Array. VGA is an analog signal typically used on earlier computers. The signal is non-interlaced in
modes 1, 2, and 3 and interlaced when using in mode.
●DVI: Digital Visual Interface. The digital video connectivity standard that was developed by DDWG (Digital Display
Work Group). This connection standard offers two different connectors: one with 24 pins that handles digital
video signals only, and one with 29 pins that handles both digital and analog video.
●SDI: Serial Digital Interface. Standard definition video is carried on this 270 Mbps data transfer rate. Video pixels are
characterized with a 10-bit depth and 4:2:2 color quantization. Ancillary data is included on this interface and typically
Q2
4
BNC
3G SDI
720P@50/60 | 1080p@24/30/50/60
8
3.5mm Audio Jack(4 In | 4 Out)
2
1×HDMI-A | 1×RJ45
User Manual
51

Advertisement

Table of Contents
loading

Table of Contents