Table of Contents
Advertisement
3.2.3 Output|Input|Overview
Click
to enter interface as shown in the
right figure：
Note：
purple tip indicates input,
Device Connection
1. Click the device you need in the <All Devices>
list,such as
Q2 SN: ffff, IP: 192.168.0.20
2. click
in the <Chosen Device>.
Output Setting
Resolution:
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Q2
blue tip indicates output,
User Manual
yellow tip indicates communication.
28
Advertisement
Table of Contents
