Xpose App Control - RGBlink Q2 Series User Manual

3.3 XPOSE APP Control

Q2 support to load scene via XPOSE APP.(Note:The device and phone must be in the same network)
Connect Q2 and phone
Method 1:Connect wireless in the same WIFI
Method 2:Direct connection
(1) Install XPOSE APP in your phone first and then click
to open it,click "search"
(2) Select Q2 model and click the icon
right corner
(3) Fill in the IP address of Q2,and then click "OK".Now
the device and Q2 is connected.
Load Scene
Red indicates current scene,green indicates the save
scene,white indicates blank scene
e.g: As shown in the right picture,it is in Group 1 Scene2,
click 1 to switch to Group 1 Scene ;If you need to load
scenes in other groups,select group first and then the
scene.
Q2
in the top
User Manual 45