RGBlink Q2 Series User Manual page 26

Communication Setting：The default is <search>, if it
is< direct>,users need to type the corresponding IP
address
Serial Port：search only those connect via serial port.
Ethernet Connection：search only those connect via
ethernet.
Both Are Chosen： click both, both connections change
synchronously.
Prompt Message: open and close unlock prompt
and guide prompt.
Authorization Setting
Click to open up the authorization entry.
New:Add new USER NAME and
PASSWORD
Edit: Edit user name and password already built.
Delete: Delete user name and password already
built.
Permission: functions on this XPOSE 2.0 on this
computer that the users are allowed to operate.
Click the green block to remove the function not to
be permitted.
Click "new",type in User Name and Password.
Q2 User Manual 26