Panel Description - Icom IC-F510 Instruction Manual

1

PANEL DESCRIPTION

I Front panel
q AF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
w STATUS UP/DOWN KEYS [Y Y ]/[Z Z ]
➥ During the standby condition, push to display the trans-
mit status indication and select a status number.
➥ When a received SDM is displayed, push to cancel the
automatic scroll and scroll the message manually.
➥ When an SDM that contains more than 10 characters is
displayed, push to scroll the message manually.
1
q w
u y
e
t
e FUNCTION DISPLAY (p. 3)
Displays a variety of information such as an operating
channel number/name, code, status message.
NOTE: The above functions depend on pre-program-
ming.
r CHANNEL UP/DOWN KEYS [
➥ During standby condition, push to select an operating
channel.
➥ After pushing [TX CODE CH], push to select a TX code
channel.
➥ After pushing [DTMF], push to select a DTMF channel.
➥ While pushing [SCAN], push to select a scan group.
➥ After pushing [DIGITAL], push to select a BIIS code, sta-
tus number or SDM.
r
]/[ ]