Table of Contents
Advertisement
Features and Controls
For numeric gauge measurements, press
the "GAUGES" button on the Trip
Monitor until "COOL," appears. The
number that appears next to the fuel
gauge is the coolant temperature. If "LO'
appears, the temperature is below 32°F
(0°C).
...
90
T
VOLTS
I
Voltmeter
You can read the charging system's rate of
charge on your voltmeter when your
engine is running. When the engine is not
running, the voltmeter shows the voltage
output of yQur battery.
Readings between the shaded areas show
the normal operating range. The reading
will change as the rate of charge changes
(with engine speed, for example), but if
the voltmeter reads in either shaded area,
and it stays there, you may have a
problem with the charging system. Have
it checked right away. Driving with the
voltmeter reading in a shaded area could
drain your battery.
If you must drive a short distance with the
voltmeter reading in a shaded area, turn
off all your accessories, including your
comfort controls and audio systems.
For numeric gauge measurements,
press the "GAUGES'' button on the
Trip Monitor until "VOLt" appears.
The number that appears next to the fuel
gauge is the battery voltage.
Advertisement
Table of Contents
