Brake System Warning Lights - Chevrolet 1994 Corvette Owner's Manual

Hide thumbs Also See for 1994 Corvette:
Table of Contents

Advertisement

Features and Controls
It takes more (or less) fuel to fill up
than the gauge reads. For example, the
gauge reads half full, but it took more
(or less) than half of the tank's
capacity to fill it.
The gauge moves a little when you
turn, stop or speed up.
You can use the Trip Monitor to display
more detailed fuel information. Each time
you press "FUEL INFO," one of the
following will appear next to the fuel
gauge.
INST The fuel economy calculated
for your current driving conditions.
AVERAGE: The fuel economy
calculated for the current tank of fuel,
or since you last reset the display.
RANGE: The distance you can drive
before refueling.
Blank: The fuel gauge is displayed
alone.
You should reset the fuel information
display every time you refuel. Press
"RESET FUEL" on the Trip Monitor.
:loser to the floor. It may take longer to
stop. If the light is still on, have the
vehicle towed for service. (See "Towing
Your Vehicle" in the Index.)
...
84
Brake System Warning Light
Your Corvette's hydraulic brake system
is divided into two parts. If one part isn't
working, the other part can still work and
stop you. For good braking, though, you
need both parts working well.
This light should come on as you start thc
vehicle. If it doesn't come on then, have
it fixed so it will be ready to warn you if
there's a problem. If this warning light
stays on, there could be a brake problem.
Have your brake system inspected right
away.
If the light comes on while you are
driving, pull off the road and stop
carefully. You may notice that the pedal
is harder to push. Or, the pedal may go

Advertisement

Table of Contents
loading

Table of Contents