Table of Contents
Advertisement
Problems on the Road
4. Then fill the coolant recovery tank to
the "HOT" mark on the dipstick.
5. Put the cap back on the coolant
recovery tank, but leave the coolant
high fill reservoir pressure cap off.
6. Start the engine and let it
run until
you can feel the upper radiator hose
getting hot. Watch out for the engine
fans.
7. By this time the coolant level inside
the coolant high fill reservoir filler
neck may be lower. If the level is
lower, add more of the proper mix
through the filler neck until the level
reaches the base of the filler neck.
.
.
.158
Advertisement
Table of Contents
