Service and Appearance Care
2. Pull the lens out.
3 .
Push the bulb in, turn it
counterclockwise, then pull it out.
4. Reverse the steps with a new bulb. To
prevent water from getting inside the
lens, make sure the lens seal is
properly positioned.
. .
. I 9 8
lack-up Light
I' o u can reach the back-up lights by
emoving the license plate and reaching
hrough the opening.
.
Push the tab on the socket and turn it
counterclockwise.
!.
Push the bulb in, turn it
counterclockwise, then pull it out.
1. Reverse the steps with a new bulb.