Wilo -SCP Installation And Operating Instructions Manual page 2

WILO Mather and Platt is very grateful for your interest in its products. The basic objective of this
document is to provide instructions for maintaining and operating WILO Mather and Platt
Horizontal Split Case pumps. Instructions are compiled for the person having a working knowledge
of Horizontal Split case pumps and the pumps shall be installed under expert supervision and
guidance.
With this document WILO Mather and Platt does not accept any liability for inaccurate installation,
operation or maintenance of the product at site. The authorities that install and maintain the pump
shall be responsible for hassle free installation operation or maintenance of the product.
This document is prepared with at most care to ensure correct and accurate information, enabling
the user to have trouble free installation and operational support. However, there can be few areas
for improvement to make this document error free.
We welcome your valuable suggestions to make this document complete in all respects.
Pump Type -
So. No. -
Q (m3/hr.) -
H (m) -
N (rpm) -
P kW -
Imp. Dia. -
Note: To be filled by the Customer
WILO Mather and Platt Pumps Private Ltd.
(Part of WILO SE Germany)
Mumbai-Pune Road, Chinchwad,
Pune- 411 019, Maharashtra (India)
Tel: +91 20 27442100/1/2/3/4,
Toll Fee Service: 1-800-266-8866
Fax: +91 2027442111
service.in@wilo.com
www.wilo.in
Disclaimer