Ricoh Pro C9200 Operating Instructions Manual page 19

1. Load sheets of paper in the tray, and select the tray from the media catalog using the
machine's control panel.
When generating paper properties, depending on the precision of the selected paper properties,
the machine prints color charts on 5 sheets of paper (for "Standard") or on 9 sheets (for "High
accuracy"). Load paper for printing charts in the paper tray.
For details about how to select the tray from the media catalog, see "Specifying a Custom Paper"
Preparation.
2. Click the [Configuration] tab, and then click [Paper].
3. In the "Paper" screen, select the paper loaded in Step 1.
4. Click the [ACD Property].
5. Click [Generate] in the "ACD Property" screen.
6. In the "Generate ACD Property" screen, select the accuracy (High accuracy/Standard),
and then click [OK].
The color charts are printed, and paper properties are generated.
The number of color charts to be printed is 5 for "Standard" and 9 for "High accuracy".
7. Click [CLOSE] in the "ACD Property Available" screen.
8. Check that paper properties have been successfully generated on the "Paper" screen.
Also, check that the [ACD] field of the paper to generate paper properties is set to [Enabled].
• To continue generating paper properties, select a sheet of paper with the [ACD] field set to
[Disabled], and then click [ACD Property] in the screen.
• To back up the Auto Color Diagnosis property status and the date of generation, use the backup
function in "Disk Operations" on the "Configuration" tab in the "TotalFlow" window. When you
restore the data, do so using the normal restore function. (Do not restore the data partially.)
Generating Paper Properties (When Using TotalFlow)
DWQ754
17