Ricoh Pro C9200 Operating Instructions Manual page 12

1. Using the Auto Color Diagnosis Function
6. In the "ACD Property" screen, select the paper loaded in Step 1.
7. Click the [Generate ACD Property] button.
• A confirmation screen prompting you to perform calibration may be displayed. To proceed to
generate paper properties, click the [Generate ACD Property] button again.
• The color charts are printed, and paper properties are generated.
8. Confirm the generation result the information, and then click [OK].
9. Check that paper properties have been successfully generated on the "ACD Property"
screen.
Also, check that the [ACD status] field of the paper to generate paper properties is set to [Enabled].
• To continue generating paper properties, select a sheet of paper with the [ACD status] field set to
[Disabled], and then click [Generate ACD Property] in the bottom right corner of the screen.
• The status and generation date of an ACD property are included automatically in the exported,
imported, backed up, or restored data when performing the following operations (However, if a
profile other than the default profile has been selected in the paper catalog, it is necessary to back
up and restore the server color settings.):
• Exporting or importing the paper catalog of Fiery Command WorkStation using the export/
import function
• Backing up or restoring the paper catalog using the backup/restore function of the server
10
M0B2WC0024