Tools - Husqvarna PG 530 Workshop Manual

18

18.Tools

Assembly Rack
Art. no. 5101527—01
Service-rack
5054636—01
● Rack for handling and working with the machine.
Rack parts:
(a) ×2 short frame wall.
(b) ×3 frame cross member.
(c) ×2 corner cross member.
(d) Fork for cradle pivoting bar.
(e) Locking pin for securing the cradle.
(f) ×4 swivel wheel with pedal lock
Cradle – PG530
5054639—01
● Cradle for mounting machine in service rack.
Cradle parts:
(a) Cradle frame.
(b) Pivoting bar (fits in rack fork).
(c) Locking pin hole.
(d) Support feet.
(e) Clamp support.
30mm
×2
34
Tools – supplied
Includes; rack and cradles for
530/680/820, clamps, lifting strap,
2 D-shackles
Clamps
5101448—01
● Two clamps for securing the ma-
chine in the cradle.
Tools
● = Service action
LIFTING TOOLS
Assembly Tool Kit
Art. no. 5101529—01
SPECIALITY TOOLS
Lifting strap
5101449—01
● For hoisting machine (with cradle
clamped on), to and from the ser-
vice rack.
Shackle
5101450—01
● Two shackles to secure the lifting
strap to the lifting lugs.
×2
Includes; speciality and press tools
for 530/680/820
8mm deep socket Allen key
5101451—01
● An extended impact socket for the
centre bolt of the PG530.
17mm deep socket
machined
5101453—01
● Used for all chain ring nylock
nuts.
530 centre drive pulley
push rod
5101455—01
● Used in conjunction with a bear-
ing puller to lift the PG530 centre
drive pulley if seized onto the mo-
tor drive shaft.