Table of Contents
Advertisement
vvn,,
Keep your wheels clean using a soft clean cloth with
mild soap and water. Rinse with clean water. After
rinsing thoroughly, dry with a soft clean towel. A wax
may then be applied.
The surface of these wheels is similar to the painted
surface of your vehicle. Don't use strong soaps,
chemicals, abrasive polishes, abrasive cleaners or
abrasive cleaning brushes on them because you could
damage the surface. You may use chrome polish on
chrome wheels, but avoid any painted surface of the
wheel, and buff off immediately after application.
Don't take your vehicle through an automatic car wash
that has silicon carbide tire cleaning brushes. These
brushes can also damage the surface of these wheels.
Til
To clean your tires, use a stiff brush with a tire cleaner.
'
NOTICE:
When applying a tire dressing, always take care
to wipe off any overspray or splash from all
,
painted surfaces on the body or wheels of the
'
vehicle. Petroleum-based products may damage
the paint finish.
I V
31
Dal
Y
[f your vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
spplies anti-corrosion material to the parts repaired or
replaced to restore corrosion protection.
ish
Dama;
!
Any stone chips, fractures or deep scratches in the finish
should be repaired right away. Bare metal will corrode
quickly and may develop into a major repair expense.
Minor chips and scratches can be repaired with touch-up
materials available from your dealer or other service
outlets. Larger areas of finish damage can be corrected
in your dealer's body and paint shop.
Advertisement
Table of Contents
