Table of Contents
Advertisement
The DIC display gives you the status of many of your
vehicle's systems. The DIC is used to display driver
selectable information and warning/status messages.
If more than one problem is detected, the DIC will
automatically display all current messages.
I t
i,",
i
I
TRIP
i
pgi
i
DISPLAY ON/OFF:
Pressing this button will turn off
the DIC, Electronic Climate Control, fuel data center,
the fuel gage, trip odometer and odometer. While the
displays are off, pressing the INFORMATION button
will only turn on the DIC. If the TRIP SET button
is pressed or the fuel level falls below four gallons
(15.2 L),
all the displays will come back on.
ENGlMET (English/Metric): You can change the
display from English (miles) to metric (kilometers) by
pressing this button. The same button also changes other
readings (like temperature, fuel and odometer).
TRIP SET:
By using this button you can tell how far
you've gone since you last set the TRIP SET back to
zero. To reset, press and hold the button until zeros
appear. If your vehicle is domestic, the trip odometer
will return to zero after 999.9 miles (1 609
km).
If your
vehicle is Canadian, the trip odometer will return to zero
after 1 999.9
k m
(1,242 miles).
75
Advertisement
Table of Contents
