Change Fieldserver Password; Figure 49: Fieldserver Password Update Via Fs-Gui - MSA fieldserver QuickServer FS-QS-2 0 Series Startup Manual

10.3.4 Change FieldServer Password

•
Click the Password tab.
•
Change the general login password for the FieldServer as needed.
NOTE: The password must meet the minimum complexity requirements. An algorithm
automatically checks the password entered and notes the level of strength on the top right
of the Password text field.
NOTE: If a gateway in the field is updated to a secure gateway, the password will change to
"admin". This change will still occur if the gateway was already setup with a unique
password that was loaded in the factory and printed on the label.

Figure 49: FieldServer Password Update via FS-GUI

QuickServer Start-up Guide
Additional Information
51