Change Web Server Security Settings After Initial Setup; Figure 39: Quickserver Landing Page; Figure 40: Fs-Gui Page - MSA fieldserver QuickServer FS-QS-2 0 Series Startup Manual

10.2 Change Web Server Security Settings After Initial Setup

NOTE: Any changes will require a FieldServer reboot to take effect.
•
Navigate from the QuickServer landing page to the FS-GUI by clicking the blue "Diagnostics" text
on the bottom of the screen.
•
Click Setup in the Navigation panel.

Figure 39: QuickServer Landing Page

Figure 40: FS-GUI Page

QuickServer Start-up Guide
Additional Information
44