Ingenico Move 2500 User Manual

Navigation
keys
F2 menu
F3 menu
For chip
card

PAYMENT WIH CHIP CARD

Payment confirmation with PIN

1. Enter the payment sum in cents and press
green button.
2. When card
„Present card. Sum XX EUR",
to insert the payment card.
3. After customer inserts the payment card, the
„Authorization. Amount XX EUR
message
sum. Enter PIN"
screen.
4. When customer enters PIN code and press
green button, the message
Remove card"
5. If customer enters wrong PIN code it can be
edited by using
button is used in order to cancel payment.
Payment confirmation with signature
Enter the payment sum in cents and press
1.
green button.
When the card reader displays message
2.
„Present card. Sum XX EUR",
to insert the payment card.
3. After customer inserts the payment card,
"Approved"
message
and card reader prints the receipt.
4. Ask customer to sign on receipt and check
if the signature coincides the one on the
payment card.
5. If signature concides, confirm payment
with green
coincide, cancel the payment with
button.
EPS LT, UAB
Company code 302413851
VAT code LT10000481191
reader displays message
ask customer
appears on card reader's
„Approved.
is displayed.
yellow button. The
ask customer
appears on screen
button. If signature doesn't
Ingenico Move 2500/3500 and Desk 3500

PAYMENT WITH CONTACTLESS CARD

Contactless
1. Enter the payment sum in cents and press
card
green
2. When
Magnetic
„Present
card
customer to tap the payment card.
3. After a few seconds audible signal (beep) is
Cancel
heard and four green LED lights indicators
switch on card reader.
The message "Approved. Card is read.
4.
Edit
Remove
reader's screen.
Confirm
If the amount of purchase doesn't exceed the sum o f
contactless payment limit set by banks, usually
confirmation with PIN code is not needed.
In some cases, due to the implemented security
requirements, additional authentication of payer is
required in one of the following ways:
 When the customer taps the card, the
message "Insert card" is displayed. Ask the
customer to insert the card and enter the PIN
code.
 When the customer taps the card, an
audible signal is heard and the message
"Enter
customer to enter a PIN.
 When the customer taps the card, an
audible signal is heard and the message
"Remove the card. Repeat." is displayed.
Ask the customer to tap the card again.

PAYMENT WITH MAGNETIC CARD

red
1. Enter the payment sum in cents and press
green
2. When
„Present card. Sum XX EUR",
to swipe the card through magnetic stripe.
3. After customer swipes the payment card,
message
sum. Enter PIN"
4. After customer enters and confirms PIN
code,
customer's payment card number might
appear on the screen
5. Enter last four digits of card number and
press
„Approved"
In some cases payment with magnetic card might
be confirmed with signature (see instruction s fo r
red
payment confirmation with signature).
+370 5 203 2772
inf o@e ps. lt
www. e ps. lt
user manual
button.
card reader displays
card. Sum XX
card"
appears on the card
PIN code" is displayed. Ask the
button.
card reader displays
„Authorization. Amount XX EUR
is displayed on the screen.
a request to enter last four digits of
green button. The
appears on the screen.
Savanorių av. 123A
LT-03150 Vilnius
Lithuania
message
EUR",
ask
message
ask customer
message