Proceq ZAA 2300 Instruction Manual page 7

The Automatic Film Applicator Proceq ZAA 2300 is constructed in
accordance with the state of the art and is safe in use. However, there is
always risk when the instrument is handled improperly or otherwise as
intended by the manufacturer.
Das Proceq ZAA 2300 is exclusively intended for the preparation of
coatings. Any other use is considered as being not in accordance with the
intentions of the manufacturer and is conducted at the user's own risk. The
manufacturer is not liable for any resulting damages.
Every person operating or maintaining the Proceq ZAA 2300 must have read
and understood this instruction manual in its entirety, in particular the safety
precautions and warnings.
Unauthorized modifications and changes of the Proceq ZAA 2300 are not
permitted.
Before lifting or moving the apparatus, the glass plate / heating plate must
be removed to reduce the total weight. Tilting the device can lead to falling
out of the glass plate.
All maintenance and repair not explicitly allowed and described in this
manual (see. Chapter 8.1 "Maintenance and cleaning work that can be
carried out by the user" on page 24), shall only be carried out by Proceq SA
or your authorised Proceq agent, failure to comply voids warranty.
Proceq SA refuses all warranty and liability claims for damages caused by
usage of the Proceq ZAA 2300 in combination with non-original
rd
accessories, or accessories from 3 party suppliers.
All local safety regulations apply for the operation of the Proceq ZAA 2300.
The following warning symbols can be seen on the device:
Danger of hand injury: Hands can be bruised, or otherwise injured.
Page 7