5
Assembly and starting up
Before the first use the apparatus has to be assembled:
•
Place the device on a solid, even surface at its intended location. Loosen the
start stop (1).
•
Open the clamping device (5), by pressing the release lever (4) and the
clamping grip (3) together until you hear a click, then tilt the clamping grip (3)
backwards. The clamping device (5) can be moved to the back at the same
time.
•
Insert the heatable precision-vacuumplate or the heating plate by first guiding
the cable under the clamping device (5).
Page 14