Table of Contents
Advertisement
Operating and Maintenance Instructions
H25 – Adv. Settings – LCD Brightness
It is recommended to leave this option as
"Auto-Detect" to avoid display flickering in
case the controller is powered from a low
current power supply such as 10V 10mA
from two fans
The controller will be reset to its factory settings configuration and all connected
fans will be set to their default Modbus Address 1 and 0-10V Input control
210-OMI14229-Iss8.1
© ebm-papst UK Ltd 2021
H27 – Advanced Settings – Factory Reset
CN1116 Full OMI
Chelmsford Business Park Chelmsford Essex CM2 5EZ
Telephone: +44(0)1245468555 Fax: +44(0)1245466336
e-mail
sales@uk.ebmpapst.com
H26 – Adv. Settings – Erase Sensor Map
After erasing the sensor map from non-
volatile memory, the MDC will go the
Sensor Mapper screen before reaching
H6
Page 47 of 47
Advertisement
Table of Contents
