Advertisement
Single Oven Housing
»
Top-rail cannot be fitted above a single oven in a base
unit, or above a built-under double oven.
»
Use end caps [GPTOPCAP**] to finish the top-rail on
either side of the appliance.
»
Use end caps [GPMIDCAP**] to finish the mid-rail on
either side of the appliance.
Dishwasher & Refrigeration Housing
»
To fit appliances below the top-rail the appliance
height must be checked carefully before ordering.
»
The distance below the top-rail to the floor is 812mm.
»
Plinth height can be raised to 155mm in order to
accommodate appliances up to 817mm high.
»
When appliances cannot fit below the top-rail
[including free-standing appliances] we recommend
fitting base panels either side of the appliance and
terminating the top-rail on each side.
[Note: a full height 715mm door will need to be
ordered when installing in this way].
NOTE:
** Refers to rail colour.
1
2
9
Advertisement
