Advertisement
Vertical Double Rail Profile
»
Vertical double rail profile is used for fitting
onto tall units when two opening doors meet.
Available in various lengths:
Standard finishes:
Bespoke finishes:
4200mm – GPVD**
3000mm – GPVD**
2180mm – GPVDET**
2180mm – GPVDET**
2005mm – GPVDT**
2005mm – GPVDT**
»
Can be cut to size on site using a circular
chop saw.
»
Secure to the tall units using fixing brackets.
Supplied in a pack of 10 fixings [GPVFIX10].
»
Tall unit gables are supplied routered to accept
the vertical rail.
»
Tall units must have a 30mm space between
each unit to allow for the vertical rail.
»
Specify left-hand hinged [L] or right-hand hinged
[R] option when ordering tall units. If a vertical
profile is to be fitted on both sides of a tall
housing then a double-handed [D] option should
be specified [see illustration].
NOTE:
** Refers to rail colour.
1
Fitting details:
BIRDS EYE VIEW
Left hand
Double
hinged unit
handed unit
BIRDS EYE VIEW
30mm Space
30mm Space
30mm Space
Single fixing plate
MDF fixing block
66.2mm
17mm
Right handed
hinged unit
30mm Space
Single fixing plate
MDF fixing block
Single fixing
15.8mm
15
Advertisement
