Advertisement
Vertical Single Rail Profile
»
Vertical single rail profile is used for fitting
onto tall units when you have an opening door
on one side only. It can also be used to end a
run when an end panel is fitted.
Available in various lengths:
Standard finishes:
Bespoke finishes:
4200mm – GPVS**
3000mm – GPVS**
2180mm – GPVSET**
2180mm – GPVSET**
2005mm – GPVST**
2005mm – GPVST**
»
Can be cut to size on site using a circular
chop saw.
»
Secure to the tall units using fixing brackets.
Supplied in a pack of 10 fixings [GPVFIX10].
»
Tall unit gables are supplied routered to accept
the vertical rail.
»
Tall units must have a 30mm space between
each unit or end panel to allow for the
vertical rail.
»
Specify left-hand hinged [L] or right-hand
hinged [R] option when ordering tall units
[see illustration].
NOTE:
** Refers to rail colour.
1
Fitting details:
BIRDS EYE VIEW
BIRDS EYE VIEW
NOTE:
The illustration above shows a
left-hand hinged tall unit.
17mm
30mm Space
30mm Space
Single fixing plate
Singl
MDF fixing block
MDF
48.2mm
15.8mm
17
Advertisement
