Advertisement
Wall Units
»
Wall profile for all wall units [GPWALL**]
»
Lengths available;
4200mm for standard finishes,
3000mm for bespoke painted finishes.
»
Can be cut to size on site using a circular
chop saw.
»
Wall carcases are supplied routered and notched
to accommodate the wall profile.
»
No fixings required – profile slots directly into
the carcase [clear silicone adhesive should be
used to bind the rail with the panel].
»
Note that wall profiles must be mitred for corner
wall units [no internal corner connectors are
available for wall profiles].
»
Plant-on end panels must be fitted to all wall
unit end runs due to the carcase side gables
being notched for the rail.
NOTE:
** Refers to rail colour.
1
Fitting details:
25mm
35mm
2.6mm
10mm
25mm
13
Advertisement
