Advertisement
1
Top-rail
» Top-rail profile for base units
[GPTOP**]
» Length available;
4200mm for standard finishes,
3000mm for bespoke
painted finishes.
» Can be cut to size on site using
a circular chop saw.
» Secure to base units using fixing
brackets. Supplied in packs of
10 fixings [GPFIX10].
» Base cabinets are supplied
routered to accommodate
the rail.
3
Top-rail External Corner
» Use with the top-rail when running
the rail around corners on the end
of a base unit run or on an island.
» For use in conjunction with
external corner posts or mitred
island end panels.
» Supplied singularly [GPTOPEXT**]
» Colour co-ordinated to the top
rail profile.
NOTE: Distance behind top-rail to
back of carcase is 534mm, units
may need to be pulled forward to
accommodate sink and/or hob.
534mm
Base Unit
720mm
57mm
26mm
4
2
57mm
684mm
Top-rail Internal Corner
» Use with the top-rail to run the
rail around corner base units
[suitable with both conventional
and 'L' shape corner bases].
» Supplied singularly [GPTOPINT**]
» Colour co-ordinated to the top
rail profile.
Top-rail End Caps
» Caps to be used with the top-rail
to finish against a wall, end panel
or appliance.
» Supplied in pairs [GPTOPCAP**]
» Colour co-ordinated to top-rail.
NOTE:
** Refers to rail colour.
5
Advertisement
