Specifications - Sony LY51 Instruction Manual

10. SPECIFICATIONS

Item
Main display (LED)
Sub-display (LED)
Alarm message display
Display resolution
Input scale units
Addition/subtraction
scale units
Reset function
Preset function
Recall function
Data storage function
Linear compensation
Note 1) The optional adapter DZ51 is necessary when connecting the DG-B series/DL-B series/DL-BR series.
192
Signed 7 digit data (leading zero suppression, floating minus)
Displayable data Selectable from current value (1st axis input data, 2nd axis input data, 1st/2nd axes
addition/subtraction data), and maximum, minimum and peak-to-peak values with
respect to current value
Signed 7 digit data x 2 (leading zero suppression, floating minus) Various setting information
Displayable data Same as main display or comparator setting values
1) Temporary power failure
2) Maximum response speed exceeded/input scale unit disconneced
3) Stored data error
4) Zero point reference error/response speed exceeded during zero point detection (= maximum response
frequency 50 kHz)
According to the type of input scale unit (See P.147)
1 axis from Magnescale, Digiruler, DG-B/DL-B, DE-B and GA
1 axis from Magnescale, Digiruler, DG-B/DL-B, DE-B and GA
Display value set to 0 by key operation or external reset.
Preset value set by key operation.
Preset value recalled by key operation or external recall.
Display value and preset data stored when power is turned off (Nonvolatile memory).
(Function enable/disable can be selected by the initial settings.)
Adds or subtracts the unit length to the display when the scale has moved for a certain distance (maximum
±600 µm).
Contents
Note 1)
Note 1)