Table of Contents
Advertisement
4. Select the desired item with the cursor movement
keys
.
The selected item flashes.
"1+2" : 1st and 2nd axes added
"1–2" : 2nd axis subtracted from 1st axis
"2–1" : 1st axis subtracted from 2nd axis
Press
F .
The item menu is switched using
"1/2" : 1st and 2nd axes independent
Note
When the 1st and 2nd axes are independent,
peak hold and other operations are
performed for the 1st axis.
5. Select the necessary items and press
Enters the item.
(In this case, 2nd axis subtracted from 1st axis (1–2)
is selected.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
3. Press
RESET
or select "End" and press
Interrupts the input axis and addition/subtraction axis
settings.
(Previous setting contents remain.)
142
F .
.
ENTER
.
ENTER
Main display
Sub-display
Sub-display
Main display
Sub-display
(Lights)
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
↓
Advertisement
Table of Contents
