Sony LY51 Instruction Manual page 3

[ For EU and EFTA countries ]
CE Notice
Making by the symbol CE indicates compliance of the
EMC directive and the Low-voltage directive of the
European Community. Such marking is indicative
meets of exceeds the following technical standards.
EN 55 011 Group 1 Class A :
" L i m i t s a n d m e t h o d s o f m e a s u r e m e n t o f
electromagnetic disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency
equipment"
EN 50 082-2 :
"Electromagnetic compatibility - Generic immunity
standard Part 2 : Industrial environment"
EN 61 010-1 :
"Safety requirements for electrical equipment for
measurement, control and laboratory use Part 1:
General requirements"
警告
本装置を機械指令 (EN 60 204-1) の適合を受ける機器
にご使用の場合は、その規格に適合するように方策
を講じてから、ご使用ください。
Warning
When using this device with equipment governed by
Machine Directives EN 60 204-1, measures should be
taken to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet wird,
die von den Maschinenrichtlinien EN 60 204-1 geregelt
werden, müssen Maßnahmen ergriffen werden, um eine
Übereinstimmung mit diesen Normen zu gewährleisten.
[For the customers in U.S.A.]
WARNING
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
[For the customers in Australia]
Australian EMC Notice
This product complies with the following Australian
EMC standards.
AS/NZS 4252.1 /94 EMC Generic Immunity Part1
AS/NZS 2064.1 /91 EMCISM Equipment