2.6.1.2
Mount the Chassis (Inner) Member to the Chassis
You may opt for an M4 or MS pan head screw. The screw head of either M4 or MS
can not exceed 2.0 mm. Alternatively, you may mount the slide member to the chas-
sis through standoffs. Likewise, the head of stand-off may not exceed 2.0 mm. For
each side of the chassis it is highly suggested to use 3 of the screws or standoffs for
slide attachment.
2.6.1.3
Attach the Cabinet (Outer) Member to the Rail
Insert the stag into the upper and lower square holes on EIA rail from the back of the
rail.
Push the safety lock forward to secure the bracket. It's important to check if the safety
lock is in an unlocked position before mounting the brackets.
HPC-8104 User Manual/ 用户手册
20