Tools; Housing Assemblies - Fellowes Proteus A3/125 Technical & Service Manual

6
Revised 09 .15 .11

Tools

Screwdrivers
Pliers
Wrenches/Sockets
Gauges

Housing Assemblies

The laminator housing consists of the top housing cover and a
bottom metal plate . The housing cover holds the operator control
panel, power switch, and cord socket . The bottom plate holds all
the mechanical and electrical assemblies and has four rubber feet
attached to prevent the laminator from moving .
This section has procedures to:
Remove Housing Cover

Remove Rubber Foot

Replace Control PCB

Housing
Cover
Bottom Metal
Plate
Phillips screwdrivers
Flathead screwdrivers
Long nose pliers
E-clip pliers
Allen wrenches
Socket wrenches
Nut drivers
Roller pressure gauge
Proteus A3/125 Technical Service Manual
PC Board and
Keypad