Speed And Motor Controls; Safety - Fellowes Proteus A3/125 Technical & Service Manual

Speed and Motor Controls

Safety

When servicing the Proteus A3, observe the following safety
precautions:
Never put a hand, fingers, or foreign objects into the entry

slot .
Keep all loose articles of clothing, ties, jewelry, long hair,

or other loose objects away from the paper entry slot and
mechanism .
Always turn off and unplug the power cord at the wall outlet

before doing any work on the laminator .
Use only Fellowes-approved replacement parts .

Proteus A3/125 Technical Service Manual
DN/UP - Adjusts the roller temperature to
match the thickness of laminating stock
MEAS - Actual temperature of rollers
CARRI - Selects carrier setting (100
and motor speed 2) for laminatiing
pouches
PREHT - Select standby setting (80
and motor speed 2)
MOUNT - Selects mount board setting
o
(130 C and motor speed 1), for
laminating hard board more than 1mm
thickness
COLD - Selects no heat lamination
HOT - Selects normal setting (90
motor speed for hot pouch films)
o
C
o
C
o
C and
3
Revised 09 .15 .11