Remove/Replace Motor - Fellowes Proteus A3/125 Technical & Service Manual

Remove/Replace Motor

1
Disconnect wire connector from connector to
Main PCB .
2
Remove 2 screws on Motor/Gear Fixing Mat
(motor left side) .
Note: The 2 screws have a washer head. Be sure to
use these screws on this Mat.
3
Remove 2 screws Motor Fixing Mat (motor right
side) .
Note: The 2 screws each have a lock washer and a
flat washer. Be sure to use these screw on this Mat.
4
Place new Motor and secure it with the 4 screws .
5
Reattach connector to Main PCB .
Proteus A3/125 Technical Service Manual
DO THIS FIRST
Remove Housing Cover
TOOLS
Long nose pliers
Phillips screwdriver
Revised 09 .15 .11
23