Mechanical Assemblies; Remove Roller Assembly - Fellowes Proteus A3/125 Technical & Service Manual

Mechanical Assemblies

This section has procedures to:

Remove Roller Assembly


Remove/Replace Hot Rollers (Red)

Remove/Replace Hot Rollers (Blue)

Remove/Replace Hot Rollers (Gray)

Remove Side Panels and Roller Press Side Panel

Covers
Remove Roller Electric Brush

Remove/Replace Metal Gears

Remove/Replace PVC Gears

Replace Roller Bushing

Remove Roller Assembly
1
Remove the 4 acorn nuts from the Metal Bottom Plate
on the reverse side of the laminator .
2
Remove the 4 screws that hold the Roller Assembly to
the Bottom Plate .
3
Carefully lift and rotate the Roller Assembly and place it
on its end opposite the motor .
Proteus A3/125 Technical Service Manual
DO THIS FIRST
Remove Housing Covers
TOOLS
Phillips screwdriver
Revised 09 .15 .11
9