Remove Side Panel And Roller Press Side Panel Cover - Fellowes Proteus A3/125 Technical & Service Manual

DO THIS FIRST
Remove Housing Cover
TOOLS
Flathead screwdriver
Phillips screwdriver
14
Revised 09 .15 .11
6
Replace lower gray Roller .
Note: Make sure the PVC gear is on the left end (away
from the motor) and that the flat side of the Roller bushings
is facing up.
7
Replace the upper gray Roller .
Note: Make sure the PVC gear is on the left end (away
from the motor) and that the flat side of the Roller bushings
is facing up.
8
Replace the upper red Roller .
9
Replace the Side Panel Covers and secure with
2 screws each .
Note: Make sure the Rollers are level. The Panel Covers
are spring loaded and can push the Rollers out of
alignment.
Remove Side Panels and Roller Press Side
Panels Covers
1
Remove the 2 screws each from the right and left Roller
Press Side Panel Covers .
2
Carefully remove Side Panel Covers .
Note: The Covers are spring loaded.
3
Remove the Hot and Cold Rollers .
4
Lift the upper gray Cold Roller up and out, and then lift
the lower gray Roller
Proteus A3/125 Technical Service Manual