Remove/Replace Fan
1
Remove the 2 screws that hold the Bimetal Switch/
Sensor Fixing Mat to the Metal Bottom Plate .
Mat Screws
2
Remove the Fan wires from below it .
3
Remove 2 screws that hold the Fan to the Metal Bottom
Plate .
4
Place new Fan and secure it with 2 screws .
5
Re-attach connector to Main PCB .
6
Replace the Bimetal Switch/Sensor Fixing Mat and
secure it with the 2 screws .
7
Replace Roller Assembly .
Proteus A3/125 Technical Service Manual
Fan Wires
DO THIS FIRST
Remove Housing Cover
TOOLS
Phillips screwdriver
Revised 09 .15 .11
25