Lcd Message List - Buffalo TeraStation Pro WSS User Manual

LCD Message List

Messages are displayed on the LCD panel on the front of the TeraStation. Refer to the chart below for all displayed
messages and their definition.
Normal Display
The LCD can be cycled through different modes to the normal display by pressing
TeraStation. The display items can be set in "Display Settings" on chapter 3.
LCD Message
LINK SPEED
When an Ethernet
cable is connected
to LAN Port 2,
"LINK SPEED 2" is
displayed.
Disk Space Used
Host Name and IP
Address
Calendar/Clock
Installed OS
IP Address 2
TeraStation Pro WSS User Manual
ＬＩＮＫ ＳＰＥＥＤ
Ｎｏ ＬＩＮＫ
ＬＩＮＫ ＳＰＥＥＤ
１０Ｍｂｐｓ
ＬＩＮＫ ＳＰＥＥＤ
１００Ｍｂｐｓ
ＬＩＮＫ ＳＰＥＥＤ
１０００Ｍｂｐｓ
ＨＤＤ
ＵＳＥＤ Ｃ＿Ｄ■Ｅ Ｆ
ＷＳ－ＶＬｘｘｘ
１９２． １６８． １１． １５０
ＤＡＴＥ ＴＩＭＥ
２０１2 ／０１／０１ １１：１１
Ｗｉｎｄｏｗｓ Ｓｔｏｒａｇｅ
Ｓｅｒｖｅｒ ２００８ Ｒ２
ＮＥＴＷＯＲＫ２
１９２． １６８． １１． １５１
Description
Not connected to network.
Connected at 10 Mbps.
Connected at 100 Mbps.
Connected at 1000 Mbps full duplex.
＾ Bar graphs are shown to indicate the used space for
the C, D, E, and F internal drives of the TeraStation.
When a hard drive is full, it is indicated by "^".
Displays the host name and IP address.
Displays the date and time set in the TeraStation.
Displays the OS installed on the TeraStation.
Displays the IP address of LAN port 2 when an Ethernet
cable is connected to LAN port 2.
on the front of the
47