Buffalo TeraStation Pro WSS User Manual page 22

Creating a Backup Job
1
In Windows Storage Server, navigate to Start - All Programs - BUFFALO - Backup & Replication - Backup &
Replication.
2
Remote Desktop
3
Remote Desktop
The following backup operation modes are available:
Backup Mode
Normal backup
Overwrite (incremental)
Overwrite (differential)
TeraStation Pro WSS User Manual
Click the Backup tab, then click Add.
Note: Click Refresh to update the information.
1
Enter a job name.
2
Click the box for the backup source, then click the
backup source folder is set in the displayed screen.
3
Click in the backup target box, then select the backup target folder
from the list.
4
Select the backup schedule. The backup schedule can be set at Daily,
Weekly, or Monthly. You can also choose to Run once, for a single backup
session at a chosen time, or choose Run now to immediately perform a
backup.
5
Select Mode/Option.
6
Click Save.
Description
All files from the backup source are backed up to the backup target.
The first time that this is executed, a normal backup is performed, backing
up all files. From the second time on, all new files created in the backup
source will be added to the backup target. If files have been removed from
the backup source, they will remain unchanged in the backup target. With
the addition of new files, the backup target size will be larger than the
backup source.
The first time that this is executed, a normal backup is performed for
backing up all files. From the second time on, all new files created in the
backup source will be added to the backup target, but all files removed
from the backup source will be deleted in the backup target. The backup
source and backup target will both be the same size.
button. The
21