Buffalo TeraStation Pro WSS User Manual page 25

Follow the procedure below to configure your TeraStation for replication.
1
In Windows Storage Server, navigate to Start - All Programs - BUFFALO - Backup & Replication - Backup &
Replication.
2
Remote Desktop
3
Click the Replication Source box, then click the
Notes:
• If you set a shared folder on the TeraStation as a replication source folder, and the NFS (Network File System)
has been configured to use the same folder, then replication may fail. Follow the steps below to perform
replication. Please be aware that during replication, performance may be reduced.
1
In Windows Storage Server, enter "regedit" from "Search programs and files" and press the Enter key.
2
Locate and then click "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NfsServer\Parameters".
3
Create "FFCompat" for DWORD in "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NfsServer\
Parameters".
4
Set the value of "FCCompat" to "1".
5
Restart the TeraStation.
4
Click in the Replication Target box and select the replication target folder from the drop-down menu.
Notes:
• You can only select shared folders from TeraStation models that support replication. For a list of supported
devices, refer to the Buffalo Technology website (www.buffalotech.com).
• Before setting a shared folder as a replication target, set it as a backup location first (refer to the "Setting a
Folder in this TeraStation as a Backup Folder" procedures on page 18).
• Shared folders that are set with a backup password cannot be selected as the replication target.
• The data in the replication source will be copied to the replication target folder using a differential overwrite -
existing target folder data not found in the current replication source will be deleted.
• Access attributes for files and folders are not backed up.
5
Click Apply. When the password input screen is displayed, enter the password that was set for the backup target
folder.
Notes:
• To delete the replication settings, select the replication settings and click Delete.
• Clicking Sync copies the data in the replication source to the folder in the replication target using a differential
overwrite.
6
Click OK.
TeraStation Pro WSS User Manual
Click the Replication tab.
. The replication source folder is set in the displayed screen.
24