Table of Contents
Advertisement
Email Notification
The TeraStation can be configured to automatically send an email notification whenever its settings are changed or if an
error occurs.
1
Click Start - All Programs - BUFFALO - Email Notification - Launch Email Notification.
2
Email notification is now configured.
TeraStation Pro WSS User Manual
1
Check the box next to Enable email notification.
2
Click New in the "Email Address" section and enter an email
address. You may enter up to five email addresses to receive
notifications.
3
Enter the SMTP server address and SMTP port number.
4
For User Authentication, select from None, POP before SMTP,
LOGIN (SMTP-AUTH/LOGIN), or CRAM-MD5 (SMTP-AUTH/CRAM-
MD5), then enter the username and password.
Notes:
• If POP before SMTP is used, enter the POP3 server address and
POP3 port number.
• Do not use single quotation marks ( ' ) in the password.
5
To use a secure connection, select SSL/TLS settings.
6
Enter a subject for your notification emails.
Note: The subject line should contain single-byte alphanumeric
characters only.
7
Select the events that will trigger notification emails.
8
Click Apply.
Remote Desktop
40
Advertisement
Table of Contents
