Table of Contents
Advertisement
6
7
8
Click Devices, and then right-click the virtual device that was created in the right-side window.
9
Click Disk Access - Mount Read/Write.
10
Click OK.
11
At the client computer, from the client initiator, select the target and click Connect.
12
Click OK.
13
Format the disk in Disk Management.
This completes the creation of a virtual disk for the iSCSI target.
The created iSCSI target can be connected from another server on the network using the iSCSI initiator. For the specific
usage procedures for the iSCSI initiator, refer to the OS Help.
TeraStation Pro WSS User Manual
Enter a description of the virtual disk, then click Next.
Remote Desktop
Click Finish.
Remote Desktop
29
Advertisement
Table of Contents
