Related Manuals for Smith & Noble Metal Blinds
Summary of Contents for Smith & Noble Metal Blinds
- Page 1 Step by Step Installation Instructions Metal Blinds Customer Service 800.248.8888 or visit us online at smithandnoble.com...
-
Page 2: Table Of Contents
Your new Metal Blinds have been custom–crafted to your Getting Started ....... . 3... -
Page 3: Getting Started
Metal Blinds Getting Started Remove the blind from the packaging. Do not dispose of packaging until the blind is operating to your satisfaction. Check the diagram to make sure you have all the parts indicated for the appropriate type of lift installation. -
Page 4: Attaching The Installation Brackets
Attaching the Brackets Attaching Extension Brackets Position the first two If extension brackets were BRACKET CHART installation brackets along the ordered, they must be attached Blind WIDTH # OF BRACKETS EXTENSION BRACKET mounting surface and at each to the mounting surface first. Up to 60"... -
Page 5: Inserting The Headrail
Hold Down Brackets (optional) Inserting the Headrail Tilt and slip the inside lip With the hold-down brackets WINDOW of the headrail into the cam attached to the bottom rail, SILL MOUNT bracket hooks. (Figure A) lower the blind to the hold down bracket mounting surface and mark the bracket locations. -
Page 6: Troubleshooting
Troubleshooting Care and Cleaning My Blind Doesn’t Lift: One Side Of The Blind Occasional dusting or Check to make sure cord is not Does Not Raise: vacuuming with a brush caught in headrail. If hold down Make sure the lift cords are still attachment is all that is clips were used, make sure they fastened to the bottom rail. - Page 7 Warranty All Smith+Noble blinds are designed for a lifetime of trouble-free use and is covered by a limited lifetime warranty. This warranty applies to the original customer/installation with proof of purchase and covers any defects in materials or workmanship provided that the product is measured and installed according to the product instructions.
Need help?
Do you have a question about the Metal Blinds and is the answer not in the manual?
Questions and answers