Overview Step 1 — Parts & Tools Getting Started Cordless Control With Mounting Bar First, make sure you have all the parts and tools required to install your shades. ALL THE HARDWARE YOU’LL NEED: Mounting Bar Pencil, screw-driver, ¼” nut driver, level, and a drill with a ⁄...
Step 2 — Mounting Brackets Step 2 — Mounting Brackets (con't) Plastic Tab faces up Outside Mount 2" Inside Mount First, hold the shade above the Center the shade in the window window so that it’s perfectly centered frame . Mark the position of the Plastic Tab brackets .
Step 4 — Operating the Shade Step 3 — Hanging the Shade Cordless Control Hanging the Shade Bracket Opening and closing your new Smith (Inside Mount or Headrail & Noble shades is entirely hassle- Extension Bracket) free. To lower it, pull down gently on Hook the rail onto the front of the the bottom bar .
(Optional) (Optional) Hold Down Bracket Tension Adjustment Optional Hold Down Brackets are mounted with the supplied screws . If the shade does not retract fully, you With the shade at its proper drop, place may need to increase the tension by the pin of each Hold Down into the using a screwdriver .
Step 2 — Mounting Brackets Overview 2" Cordless Control with Decorative Cassette Inside Mount Center the shade in the window frame . Mark the position of the Decorative Cassette headrail . End brackets should be located 2" in from each end . Mount the brackets to the top of the window frame .
Page 8
Step 3 — Hanging the Shade Step 2 — Mounting Brackets (con't) Outside Mount Hanging the Shade Insert the rail into the opening of the First, hold the shade above the bracket . Push the rail back until it is window so that it’s perfectly centered fully engaged .
Step 4 — Operating the Shade (Optional) Hold Down Bracket Cordless Control Optional Hold Down Brackets are Opening and closing your new mounted with the supplied screws . Smith & Noble shades is entirely With the shade at its proper drop, place hassle-free.
(Optional) Troubleshooting Tension Adjustment PROBLEM SOLUTION Make sure the mounting brackets are If the shade does not retract fully, you The shade fabric does not roll up evenly aligned and level with one another . may need to increase the tension by using a screwdriver .
Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty . The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship .
Need help?
Do you have a question about the Solar & Roller Shades and is the answer not in the manual?
Questions and answers