STEP 1 — GETTING STARTED OVERVIEW Motorization - Flat Fold Shade Getting Started First, make sure you have all the parts and tools required to install your shades. MOUNTING BRACKETS ALL THE HARDWARE YOU’LL NEED: Pencil, screwdriver, ¼” nut driver, level, and a drill with a ⁄...
STEP 2 — MOUNTING THE BRACKETS STEP 2 — MOUNTING THE BRACKETS Outside Mount Inside Mount Center the shade over the window For as inside mount, hold the shade inside the window frame. Center the shade opening at the desired height. Mark the so the space between the end of the position of the ends of the headrail on the wall with a pencil.
SOLAR PANEL CHARGING SHADE (OPTIONAL) Determine Solar Panel Placement When the shade begins to operate slower CHARGER than normal and beeps when operated it The solar panel should be placed where is time to charge the battery. is gets the maximum amount of sunlight per day.
Page 7
INSTALL SOLAR PANEL INSTALL SOLAR PANEL Bracket Method Tape Method SOLAR PANEL RECHARGE UNIT Connect the sliding bracket and the L-shape Choose the location to mount the solar panel. bracket using the two screws and nuts. Do Clean the ends of the solar panel where the not overtighten to allow for easy adjustment tape will go with rubbing alcohol.
CARE & CLEANING / SAFETY TROUBLESHOOTING Care & Cleaning PROBLEM SOLUTION Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all Shade will not raise or lower. Recharge motor. that is required to keep your shades looking fresh and neat. Shade runs slowly.
Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship.
Need help?
Do you have a question about the Woven Wood Shades and is the answer not in the manual?
Questions and answers