JAC HFC4181KR1 Owner's Manual page 7

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
3. Locking from outside
The doors can be locked without a key.
First push the lock knob down, then close the door while depressing the push
button forward.
WINDOW GLASS
To raise or lower the window, turn the window, regulator handle clockwise or
counterclockwise.
WARNING:
When opening or closing the windows, make sure your passenger's arms and
hands are safely out of the way.
6
CENTRAL DOOR LOCKS (If installed)
The central door locking system is located on the driver's door lock button. It is operated by depressing the door lock
button. If the front door is open when the button is depressed, the door will lock when closed.
NOTE:
When the front door lock button is depressed, the front doors will lock. When
the front door lock button Is pulled up, the front doors will unlock.
POWER WINDOWS (If installed)
The power windows operate when the ignition key is in the 'ON' position. The
main switches are located on the driver's door side and control the passen鄄
ger's side. The windows may be opened by depressing the appropriate win鄄
dow switch and closed by pulling upon the switch. To open the window on the
driver's side, press the switch (1) halfway down. The windows moves as long
as the switch is operated. To fully open the driver's window automatically,
press the switch fully down. In automatic operation, the window will fully open
even if you let go of the switch. To stop at the desired opening, pull upon and
release the switch. In order to prevent operation of the window by passenger,
a window lock switch (2) is provided on the driver's door. There are two types
of the power window switch. One operates for 30 seconds after the ignition
key is turned to "ACC' or 'LOCK', but the power window glass doesn't move
when doors open.
7