JAC HFC4181KR1 Owner's Manual page 101

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
Ⅱ. Operational method
1. Operation for feeding and output stuff
a. Feeding agitating of the pre -agitating concrete: pull the handle to "high
speed" position of "feeding agitating" at idle speed;
b. The agitating of the pre -agitating concrete and agitating truck: must pull
the handle to "agitating" position during driving when the agitating truck is fully
loaded with concrete;
194
c. Stuff output of pre -agitating concrete: pull the operation handle to "low
speed" or "high speed" position, meanwhile lock the stuff collecting trough in a
specific position.
d. The stop of the agitating tank: pull the operation handle to "stop".
Notice: whether the operation handle is pulled from the feeding to output side or
output to feeding side, make sure stop for a moment at stop position, pull to the
next operation position after the agitating tank is stop to avoid the breaking of
the hydraulic system.
Check whether there is water inside the agitating tank before feeding, then
keep the engine running at 700-1,000rpm, and keep the operation handle at
stuff output position so as to discharge the deposited water.
195